Cerealbot

Creator: ctag Status: Testing a hacked together Cereally 3D system Born On: 23:32, 13 December 2014 (CST) Last Updated: 14:18, 21 January 2015 (CDT)

Overview

I can haz printr.

Contributors

People who have helped make this happen:

Phillip Showers
Tyler Crumpton
Hunter Fuller

Thanks!

Software

Network

IP address: 10.56.1.34

Hostname: bns-daedalus.256.makerslocal.org

Public URL: cerealbox.256.makerslocal.org

Services: HTTP-80, WEBCAM-8080

Cereally Automated Build System

The testbed for train_rec was a success. Rather than use the length of the pop-bar as a lever to pry the piece off of the bed, I think its better to twist the bar along the length to push the 3d printed part up.

Milling the "production/testing" bed is next on the list.

External Resources

Parts

Amazon is an OK outlet for GT2 gear/belt parts for the X-Y motion

Source for 2-3mm Hex Bolts like those used in the simple metal

MISC

ctag's G+ Image Album

Printrbot initial config guide

Protoparadigm plastic I'm interested in