Cerealbot
|
Creator: |
Contents
[hide]Overview
- Https://lh4.googleusercontent.com/-8p1jUPIQ2xQ/VI1gV38I7tI/AAAAAAAAFU8/nGnmlsH nhc/w1053-h702-no/IMG 5412.JPG
I am retrofitting a Printrbot Simple Metal 3D printer with tools to allow for serialized printing. Then I hope to release the use of it to schools. For Free.
Contributors
People who have helped make this happen:
Phillip Showers Tyler Crumpton Hunter Fuller
Thanks!
Software
Network
IP address: 10.56.1.34
Hostname: bns-daedalus.256.makerslocal.org
Public URL: cerealbox.256.makerslocal.org
Services: HTTP-80, WEBCAM-8080
Slic3r Config
Cereally Automated Build System
The testbed for train_rec was a success. Rather than use the length of the pop-bar as a lever to pry the piece off of the bed, I think its better to twist the bar along the length to push the 3d printed part up.
Milling the "production/testing" bed is next on the list.
Current Configuration
Plans
Printed Upgrades
Images incoming.
- Extruder Fan Duct
- Filament Guard
- Filament Clips
- Spool Stand
- Filament Cleaner
Upgrades to be printed:
- Fan mounts for motors
- GT2 belt mounts for print bed?
Printed Parts
Project Cost Breakdown
Does not include existing things that I own which have been purposed for this project.
dd-mm-yyyy
- 28-11-2014
- Printrbot Simple Metal Unassembled - $539.00
- Filament - $22.50
- 14-12-2014
- Kapton Tape - $17.99
- Extruder Fan - $6.13
- Extruder Fan 2 - $5.95
- 8 Channel Relay - $9.99
- Went missing x(
- 12V Power Supply - $22.14
- Hot Bed - $19.99
Project Cost: $683.54
External Resources
Parts
Amazon is an OK outlet for GT2 gear/belt parts for the X-Y motion
Source for 2-3mm Hex Bolts like those used in the simple metal
