Difference between revisions of "User:Ctag/calmato"

From Makers Local 256
Jump to: navigation, search
m (summary)
m (formatting)
Line 44: Line 44:
 
===Log===
 
===Log===
  
[29-1-2014]
+
'''[29-1-2014]'''
  
 
Parts needed for engine replacement arrived from HorizonHobby! A test fit was carried out, and the new engine appears to work with the existing frame.
 
Parts needed for engine replacement arrived from HorizonHobby! A test fit was carried out, and the new engine appears to work with the existing frame.
Line 70: Line 70:
 
** Oil - [http://www.horizonhobby.com/products/evolution-2-cycle-oil-synthetic-quart-EVOX1001Q#t3 http://www.horizonhobby.com/products/evolution-2-cycle-oil-synthetic-quart-EVOX1001Q#t3]
 
** Oil - [http://www.horizonhobby.com/products/evolution-2-cycle-oil-synthetic-quart-EVOX1001Q#t3 http://www.horizonhobby.com/products/evolution-2-cycle-oil-synthetic-quart-EVOX1001Q#t3]
  
[25-1-2014]
+
'''[25-1-2014]'''
  
 
Moved the plane and all components from house in Madison to Nick's house in HSV.
 
Moved the plane and all components from house in Madison to Nick's house in HSV.

Revision as of 21:02, 30 January 2014

Creator:
ctag
Status:
Active/passive Development
Born On:
10:56, 25 January 2014 (CST)
Last Updated:
21:02, 30 January 2014 (CDT)


Overview

ctag owns a Kyosho Calmato model airplane. It was given to him many years ago by the grandparents of his friends, Daniel and Nathan. ctag has done passive maintenance on the plane and its accessories, but has never been able to start the engine (a .40 glow engine).

The current plan is to purchase and install a gasoline engine and test the control components.

Hardware

Engine

The current engine is a Tower Hobbies .40 glow engine.

Electronics

Fuselage

Wingspan: 1600mm / 63in

Software

Maintenance

Parts List

May also need:

  • Transmitter
    • Spektrum?
  • Receiver
  • Servos
    • Futaba?
  • Batteries

Log

[29-1-2014]

Parts needed for engine replacement arrived from HorizonHobby! A test fit was carried out, and the new engine appears to work with the existing frame.

Parts list:

[25-1-2014]

Moved the plane and all components from house in Madison to Nick's house in HSV. Began assessing work needed for flight-worthiness.