Difference between revisions of "Archives/Shop 1.0/Make Shop"

From Makers Local 256
Jump to: navigation, search
(History: Meeting notes for the last meeting.)
(History: Fixed a typo.)
Line 62: Line 62:
 
*** [[User:Nykodemus|Nykodemus]], [[User:Tanstaafl|Tanstaafl]], William, [[User:Opticron|Opticron]], [[User:Strages|Strages]], [[User:Brimstone|Brimstone]], Nick, and [[User:Gregabyte|Gregabyte]]
 
*** [[User:Nykodemus|Nykodemus]], [[User:Tanstaafl|Tanstaafl]], William, [[User:Opticron|Opticron]], [[User:Strages|Strages]], [[User:Brimstone|Brimstone]], Nick, and [[User:Gregabyte|Gregabyte]]
 
** [http://strages.net/gallery/view_album.php?set_albumName=12-02-06 Pictures]
 
** [http://strages.net/gallery/view_album.php?set_albumName=12-02-06 Pictures]
* 12/15/06: Meeting was held at [[User:Strages|Strages]]'s apartment this time.  [[User:Strages|Strages]]'s [[User:Nykodemus|Nykodemus]] showed up around lunch time but most everyone else showed between 7pm and 8pm.  There was much discussion about the [[Photobooth]] and many design improvements were made as well as deciding to build not one but two because of the ingenuity of a second design made by my coworker Adrian.  There was also a fair amount of discussion on [[User:Nykodemus|Nykodemus]]'s [[Arfomyta]].  The whiteboard was used very constructively.  Meetings will most likely be held at this new location until an actual shop is found.
+
* 12/15/06: Meeting was held at [[User:Strages|Strages]]'s apartment this time.  [[User:Nykodemus|Nykodemus]] showed up around lunch time but most everyone else showed between 7pm and 8pm.  There was much discussion about the [[User:Strages|Strages]]'s [[Photobooth]] and many design improvements were made as well as deciding to build not one but two because of the ingenuity of a second design made by my coworker Adrian.  There was also a fair amount of discussion on [[User:Nykodemus|Nykodemus]]'s [[Arfomyta]].  The whiteboard was used very constructively.  Meetings will most likely be held at this new location until an actual shop is found.
 
** Attendees:
 
** Attendees:
 
*** [[User:Nykodemus|Nykodemus]], [[User:Opticron|Opticron]], [[User:Strages|Strages]], [[User:Brimstone|Brimstone]], [[User:Catpants|Catpants]], [[User:Korc|Korc]], and [[User:Gregabyte|Gregabyte]].
 
*** [[User:Nykodemus|Nykodemus]], [[User:Opticron|Opticron]], [[User:Strages|Strages]], [[User:Brimstone|Brimstone]], [[User:Catpants|Catpants]], [[User:Korc|Korc]], and [[User:Gregabyte|Gregabyte]].
 
** [http://strages.net/gallery/view_album.php?set_albumName=12-15-06&page=1 Pictures]
 
** [http://strages.net/gallery/view_album.php?set_albumName=12-15-06&page=1 Pictures]

Revision as of 21:52, 16 December 2006

Overview

A place where people can go and work on assorted projects in an environment that stimulates creativity and motivation. Most people's problem with working on projects is there are too many distractions preventing them to from completing and often even starting on a project. The make shop will provide work area, resources, and knowledge to help people with their projects.

See TechShop[1] for more details.

Outline

  1. Start out small, like a hobby club, and build up a baseline of projects to work on.
  2. Determine the resources that are needed to complete these projects.
  3. Develop a means of keeping track of progress for each project.
  4. Work on the projects.
  5.  ?
  6. Profit!
  7. No seriously though, just work on the projects.
  8. Eventually expand out into a larger area and attempt to attract more people.

Supplies Obtained

  • 2 19" CRT displays
  • 2 17" CRT displays
  • 1 mini rack
  • 2 cork bulletin boards
  • 1 large classroom style whiteboard on wheels with scanning arm
  • 1 fold up table
  • 2 fold up chairs
  • 2 deskjet printers
  • 1 black and white laserjet
  • 2.5' parabolic reflector dish
  • 1 frequency generator
  • CB radio & antennae
  • 1.5' fresnel lens
  • 3 pdas, one of which has a usb host port/

Future Plans

  1. Become non-profit organization and find projects that are a good source of income to put back into the organization.
    1. Tool upkeep.
    2. Finding a larger place.
    3. Net acccess.
  2. Once a more permanent place has been found, provide access to all members via rfids.
    1. Building access could then be all hours.
    2. Everyone would be a keyholder and responsible for building security.
  3. Net accessible cameras would be setup inside and outside the shop to provide security and ability to see who's working before you head there.
  4. Lockers would be provided to members to have a secure place in shop to keep items.
  5. Open house nights would be setup to bring in possible new members.
    1. Volunteers would be available to ask questions and provide physical security for peoples projects etc.

History