Difference between revisions of "X10 Ackis Module/ML256"
From Makers Local 256
m (created page for X10 installation notes) |
(added supporting information) |
||
| Line 1: | Line 1: | ||
| − | |||
This page is to mark Makers Local 256 specific progress of X10 installation | This page is to mark Makers Local 256 specific progress of X10 installation | ||
| Line 6: | Line 5: | ||
** Power line in the server closet is not on the same circuit as the power rails on the Main Room walls [[User:Omegix|Omegix]] 12:43, 12 February 2010 (CST) | ** Power line in the server closet is not on the same circuit as the power rails on the Main Room walls [[User:Omegix|Omegix]] 12:43, 12 February 2010 (CST) | ||
* Wall Module advertised as supporting flourescent bulbs was not able to supply enough power to the ballasts to get the lights running. Need to research as to why. Could be a bad X10 module. [[User:Omegix|Omegix]] 12:43, 12 February 2010 (CST) | * Wall Module advertised as supporting flourescent bulbs was not able to supply enough power to the ballasts to get the lights running. Need to research as to why. Could be a bad X10 module. [[User:Omegix|Omegix]] 12:43, 12 February 2010 (CST) | ||
| + | ** http://www.x10.com/support/support_q3.htm | ||
Revision as of 17:54, 15 February 2010
This page is to mark Makers Local 256 specific progress of X10 installation
- Confirmed\Learned the following
- Wall Module advertised as supporting flourescent bulbs was not able to supply enough power to the ballasts to get the lights running. Need to research as to why. Could be a bad X10 module. Omegix 12:43, 12 February 2010 (CST)
