Difference between revisions of "Network/Trusted LAN"
From Makers Local 256
< Network
Enabrintain (Talk | contribs) (→Logical: updated to reflect reality) |
Enabrintain (Talk | contribs) (→Logical: added new rollupdoorcam) |
||
| Line 18: | Line 18: | ||
|- | |- | ||
| 10.56.1.18 || casca || Coin dispenser | | 10.56.1.18 || casca || Coin dispenser | ||
| + | |- | ||
| + | | 10.56.1.75 || baycam || Rollup Door Cam | ||
|- | |- | ||
| 10.56.1.81 || wham || Big Sign Pi | | 10.56.1.81 || wham || Big Sign Pi | ||
Revision as of 21:56, 12 March 2019
This is the main LAN at the shop and it's what the makers will use to connect. This network is able to talk to all the workstations and servers on the network so only members should be able to use this (this isn't a rule but it's an important guideline).
Logical
This IP space is 10.56.1.0/24 (10.56.1.*).
| IP | Hostname | Description |
|---|---|---|
| 10.56.1.1 | router | Default router for machines in this LAN |
| 10.56.1.2 | officecam | Office webcam |
| 10.56.1.5 | biglaser | 100W Laser |
| 10.56.1.10 | ap | The UBNT AP located in the office |
| 10.56.1.11 | ipcamera | Roll-up door webcam |
| 10.56.1.18 | casca | Coin dispenser |
| 10.56.1.75 | baycam | Rollup Door Cam |
| 10.56.1.81 | wham | Big Sign Pi |
| 10.56.1.99 | copier | Carol the Canon |
| 10.56.1.139 | lasercam0 | laser facing webcam |
| 10.56.1.153 | FrontdoorCam | Front door webcam |
| 10.56.1.179 | printer | ancient laser printer |
| 10.56.1.202 | door2 | ancient door pi |
| 10.56.1.214 | simplysnap | snap controller |
| 10.56.1.236 | fablabcam | fablab webcam |
| 10.56.1.246 | loftcam | loft webcam |
Physical
Just about any port you plug into at the shop will put you on this network (probably). Wirelessly, this network is available as the "Makers Local 256" ESSID, which is WPA2 encrypted.
