Omegix/Home Automation/Sandusky

From Makers Local 256
< Omegix/Home Automation
Revision as of 16:09, 23 January 2016 by Omegix (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Zwave Controller

  • Started with a Samsung Smarthub 2.0. Difficult to program.
  • Currently using HomeSeer Hometroller ZS2

Living Room

Lights

  • HomePro ZDW120
    • Ebay: Used, $20
    • Learned that the pairing information is stored on the zwave device, and that the device must receive a leave-network command from a smart hub before it can be added to a new z-wave network.
    • Add or remove to z-wave network by turning on and then off. Same to instruct it to leave the network, after the controller has issued the leave-network command
  • HomePro ZDW100 (1 of 2)
    • Ebay: Used, $20 each
  • HomePro ZDW100 (2 of 2)
Retrieved from "https://256.makerslocal.org/wiki/index.php?title=Omegix/Home_Automation/Sandusky&oldid=19639"