X10 Ackis Module/ML256

This page is to mark Makers Local 256 specific progress of X10 installation

• Confirmed\Learned the following
  • Power line in the server closet is not the same circuit as the rest of the "office" Omegix 12:43, 12 February 2010 (CST)
  • Power line in the server closet is not on the same circuit as the power rails on the Main Room walls Omegix 12:43, 12 February 2010 (CST)
• Wall Module advertised as supporting flourescent bulbs was not able to supply enough power to the ballasts to get the lights running. Need to research as to why. Could be a bad X10 module. Omegix 12:43, 12 February 2010 (CST)