Difference between revisions of "Talk:Proposal/0015-Rules and guidelines"
From Makers Local 256
(added thought) |
Spacefelix (Talk | contribs) (added 'drinking and tooling'.) |
||
| Line 17: | Line 17: | ||
Omegix's comments: | Omegix's comments: | ||
* I think it would be good to add a minimum time limit to when you can use a powertool (anything with a moving part) in addition to the "not while intoxicated rule." I would rather deal with people bitching that they "have to wait X minutes after drinking a beer even though they're totally sober" than deal with mopping up blood and loosing our deposit. That being said, I hope this rule allows me to drink and solder at the same time, I don't really think of a soldering iron as a powertool, even though you gotta plug it in. | * I think it would be good to add a minimum time limit to when you can use a powertool (anything with a moving part) in addition to the "not while intoxicated rule." I would rather deal with people bitching that they "have to wait X minutes after drinking a beer even though they're totally sober" than deal with mopping up blood and loosing our deposit. That being said, I hope this rule allows me to drink and solder at the same time, I don't really think of a soldering iron as a powertool, even though you gotta plug it in. | ||
| + | ** Per Drinking & Driving rules (the max example), you must be able to pass a breathalyzer test before operating a vehicle. From rules from the Aeromodeling Association, no drinking 24 hours before operation of an R/C aircraft. But for us, I believe if you can still speak, see and hear coherently as well as walk in a straight line, it ought to be okay. Otherwise, one should have the right to intervene if said person is very obviously drunk and waving around power tools. | ||
Revision as of 16:33, 9 May 2011
Crashcart's comments
- These rules were painstakingly put together and advocated by someone who dislikes excessive rules. Please appreciate that he is trying to meet some people half-way here.
- It is purposeful that these rules are not actually PART of the bylaws. This allows us to be much more flexible at revising these rules as the needs change. (Microsoft method: ship it now, patch it later)
Spacefelix's comments:
I currently recommend the addition of the below clauses on shop cleanliness and safety. This is a good start and I second Alii's comments as well. I appreciate the flexibility for these rules.
- Recommend that a safety section be part of the "Guidelines" section stating that safety procedures and equipment ought to be followed and used.
- Add a 'No Tamper' rule to safety equipment for "Rules".
- Have a "KEEP IT CLEAN" added to Guidelines 5.
- Pending the institution of transient spaces in the shop, adapt the rules/guidelines to require/advise that transient spaces be respected and used accordingly.
Alii's comments:
- I think this is an important step in the growth of the shop, that these rules are well written and specific to our shop's needs.
Omegix's comments:
- I think it would be good to add a minimum time limit to when you can use a powertool (anything with a moving part) in addition to the "not while intoxicated rule." I would rather deal with people bitching that they "have to wait X minutes after drinking a beer even though they're totally sober" than deal with mopping up blood and loosing our deposit. That being said, I hope this rule allows me to drink and solder at the same time, I don't really think of a soldering iron as a powertool, even though you gotta plug it in.
- Per Drinking & Driving rules (the max example), you must be able to pass a breathalyzer test before operating a vehicle. From rules from the Aeromodeling Association, no drinking 24 hours before operation of an R/C aircraft. But for us, I believe if you can still speak, see and hear coherently as well as walk in a straight line, it ought to be okay. Otherwise, one should have the right to intervene if said person is very obviously drunk and waving around power tools.
