Difference between revisions of "HAM Shack/Antenna Tower"
From Makers Local 256
(→Parts Needed: added notes on where we could purchase a base plate) |
m (→Parts Needed: added note about contactin MFJ) |
||
| Line 15: | Line 15: | ||
** This is expensive, can we get someone to weld a custom one together? | ** This is expensive, can we get someone to weld a custom one together? | ||
** Called Gigaparts, they don't sell these, but recommended MFJ in Starkville, MS. | ** Called Gigaparts, they don't sell these, but recommended MFJ in Starkville, MS. | ||
| + | *** Have emailed in a request --[[User:Omegix|Omegix]] ([[User talk:Omegix|talk]]) 16:55, 4 February 2015 (CST) | ||
* Concrete (likely to be purchased by a concrete supplier) | * Concrete (likely to be purchased by a concrete supplier) | ||
* Shovels for digging the hole | * Shovels for digging the hole | ||
Revision as of 17:55, 4 February 2015
|
Creator: |
Contents
[hide]Overview
This is a planning page for putting up the Antenna Tower at the Make Shop
Instructional Resources
Parts Needed
- Hinged Base Plate: https://www.protelecomsupply.com/rohn-products-llc-25g-hinged-base-plate ~$350
- Concrete (likely to be purchased by a concrete supplier)
- Shovels for digging the hole
- Rebar
- Wood for hanging the base place rods in the setting concrete
- Base Plate bolts: https://www.google.com/shopping/product/5017470159642663498?safe=strict&sclient=psy-ab&q=ham+radio+hinge+base+plate&oq=ham+radio+hinge+base+plate&pbx=1&bav=on.2,or.r_cp.r_qf.&bvm=bv.85142067,d.eXY&biw=1680&bih=939&tch=1&ech=1&psi=XZvSVJKsIIyqgwTe8oO4Cw.1423088478217.3&prds=paur:ClkAsKraX9bj71jeeL1S1XzgS8kKSlzpdgsdMS2CmcvKSwYKyZeP90On-EBgmYVPRsmyXOdMl4BrLeHDrf62vID_rWP7SzStB9y-0gG04FRcqBArlLJEVBOgNhIZAFPVH7169tvGCn28Wql0GPcCuV5CTiNaaw&ei=apvSVIAtw6WDBOukg9gK&ved=0CHMQpiswAg ~$30
- if we had something that could bend metal bolts, it seems like we could make these ourselves
- Hand crank wench
- Wire for wenching the tower up and down
Capabilities Desired
- Needs to be tilt-able so we can easily service the equipment mounted on the tower without climbing it
- Needs to be semi-portable, meaning that if we ever move we can unbolt the tower and take it with us.
- Electric wench would be preferrable for taking it up and down, but we could probably do alright with a hand crank.
