Difference between revisions of "Heater"

From Makers Local 256
Jump to: navigation, search
m
(adding wiki page for heaters)
Line 1: Line 1:
'''THIS REFERENCES A BROWN ST. FACILITY ISSUE AND IS NO LONGER APPLICABLE.'''
+
{{Project|Creator=Omegix
 +
|Status=<onlyinclude> In Progress </onlyinclude>                                <!--LEAVE ONLYINCLUDES FOR STATUS HACK-->
 +
|Born On=14:45, 23 February 2016 (CST)                                                                  <!--DO NOT EDIT -->
 +
|Last Updated={{#time: H:i, d F Y| {{REVISIONTIMESTAMP}} }} (CDT)              <!--DO NOT EDIT -->
 +
}}
  
How to turn on heater:
+
==Overview==
  
See that '''light switch on the RIGHT of the heater'''?  Leave that swich the hell alone. That's the switch that lets the heater turn on at all.
+
Jeff and Daniel V. won two Dayton brand heaters in the LSINC liquidation auction.
If the fan on the heater won't turn on, you know, maybe fiddle with this switch. What are you doing?
+
One heater is missing a part, the other looks complete.
Didn't I just tell you not to touch that switch?
+
  
'''On the LEFT of the heater there's a gas line with a red handled valve.'''  that needs to be running in the same direction as the gas line it's attached
+
== To-Do ==
to to let the spice flow.  The spice must flow for the heater to work.  Paul Atreides says so.
+
# Store heaters on top of member storage
 +
# Get missing part to heater
 +
# Purchase propane conversion kit
 +
# Convert one heater to propane
 +
# Hang Converted propane heater
 +
# In May of 2016, explore option of running natural gas lines for the heaters.
  
See that '''Thermostat?'''  No?  Look harder.  Yeah, that one.
 
Ok, that thermostat has a switch on it's left side.  '''The switch needs to be set to heat.'''
 
The thermostat probably needs to be set to some warm temperature as well.
 
  
Ok, now if the cover is off of the heater, which is probably will be cause the damn thing is finnicky,
+
= Old Heater Pages =
you're going to see the fan turn on.  And then after a bit a glow plug will light up nice and orange like.
+
* [[Heater/BrownStreetHeater]]
And then FWOOOSH!  Yeah.  No, you didn't miss anything.  The damn thing just grumpy and doesn't like you.
+
Sure, Kinsey will tell you that '''within three tries it'll usually light''', and you'll start getting warm and toasty-
+
LET ME TELL YOU THAT MAN LIES.
+
  
So right about now you're probably cold.  and pissed.  '''Go find yourself a long lighter. '''
 
If you're religious, say a little prayer, cause you're about to jab a lit object into something emitting natural gas.
 
Sure, if you're mechanically inclined you probably know this is moderately safe.  There's cut off valves, and not that much
 
gas emitting during the ignition time, blah blah blah.  But if you're NOT mechanically inclined, this probably feels like
 
a great a way to kill yourself as any.  Done praying?  Cool.  May the force be with you.
 
  
Now the glow plug is going to light up something fierce again, and you're going to '''light your long lighter and put it in the
 
far right gas emitter, in the open space.'''  With any luck, it will light.  You may have do to this 1 bojillion times
 
till you get it right.  Or maybe you'll get it on the first try.  Isn't it nice to be you?
 
  
Remember to turn the heater off when you leave.  At the thermostat.
 
If you lit this baby up, this baby is now you're responsibility.
 
So '''if you leave and someone else is in the shop, ask them if they want to take responsibility for turning it off, or if they want you to turn it off
 
before you leave.'''
 
  
Don't forget that last step.  People get real damn pissy if they have to drive down here just to turn off the heater.  I did it once and Greg punched me in the face.
 
  
[[Category:Archives]]
+
[[Category:Put Category Here]]                                                 <!--MAKE AS MANY CATEGORIES AS YOU NEED-->

Revision as of 15:45, 23 February 2016

Creator:
Omegix
Status:
In Progress
Born On:
14:45, 23 February 2016 (CST)
Last Updated:
15:45, 23 February 2016 (CDT)

Overview

Jeff and Daniel V. won two Dayton brand heaters in the LSINC liquidation auction. One heater is missing a part, the other looks complete.

To-Do

  1. Store heaters on top of member storage
  2. Get missing part to heater
  3. Purchase propane conversion kit
  4. Convert one heater to propane
  5. Hang Converted propane heater
  6. In May of 2016, explore option of running natural gas lines for the heaters.


Old Heater Pages