Difference between revisions of "Omegix/Home Automation"

From Makers Local 256
Jump to: navigation, search
(Garage Door Opener: updating status of project)
(adding link for arrival sensor)
 
(4 intermediate revisions by one user not shown)
Line 1: Line 1:
= Garage Door Opener =
 
[[File:ZwaveDualRelay1.jpg|800x400px]]
 
  
Pictured Above:  Monoprice Dual Relay Controller wired to two 120 V isolated relays.  Resting inside the enclosure is a Aeon Z-wave minimote (remote) used for testing.  Both the relay controller and the minimote are joined to a Zwave networked controlled by a SmartThings v2 hub.  A SmartApp (TM) has been setup on the hub to react in the following way:
+
* [[Omegix/Home Automation/Monoprice Dual Relay Garage Door Opener | Monoprice Dual Relay Garage Door Opener]]
When Button 1 is pressed, Relay 1 is toggled.  When Button 2 is pressed, Relay 2 is toggled. 
+
* [[Omegix/Home Automation/Sandusky | Home Setup]]
== Physical Resources ==
+
* [[Omegix/Home Automation/Arrival Sensor | Arrival Sensor]]
* 2 x [http://smile.amazon.com/gp/product/B00E1L86EQ?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00 120V Isolated Relay]
+
* 1 x [http://smile.amazon.com/Monoprice-Z-Wave--Wall-Relay-Module/dp/B00V5IQATG/ref=sr_1_8?s=hi&ie=UTF8&qid=1444839006&sr=8-8&keywords=monoprice+relay Monoprice Zwave Dual Relay]
+
* Project Enclosure
+
* Standard ungrounded electrical cord
+
* electrical twist connectors
+
* Wire from a computer power supply
+
 
+
== Online Resources ==
+
* Raspberry Pi as a SmartThings endpoint:  https://github.com/nicholaswilde/smartthings/tree/master/device-types/raspberry-pi
+
** Would have to modify code to set a pin on the GPIO rather than just read it
+
* Using an off the shelf Zwave 120V loaded switch in tied to a 120V isolated relay: http://www.instructables.com/id/Z-Wave-Garage-Door-Opener-Switch/
+
* http://forum.micasaverde.com/index.php?topic=24937.0
+
* 120V isolated relay on a slow boat from china:  http://www.ebay.com/itm/HH52P-110-120VAC-Coil-DPDT-Electromagnetic-Power-Relay-WD-/181722024869
+
* [https://community.smartthings.com/t/monoprice-dual-relay-module/12961 SmartThings Dual Relay Control DeviceType]
+

Latest revision as of 13:04, 7 April 2016