Difference between revisions of "Facilities/Priority List"

Revision as of 00:03, 20 May 2016 (view source) Ctag (Talk | contribs) m (→‎Dimensions: broken out) ← Older edit		Revision as of 00:05, 20 May 2016 (view source) Ctag (Talk | contribs) m (→‎Dimensions: more measurements) Newer edit →
Line 20:		Line 20:
	* New Countertop		* New Countertop
	** 28" x 25" (w x d)		** 28" x 25" (w x d)
		+	** 5" tall at rear panel
		+	** 1&1/2" tall at front lip
		+	** 3/4" thick at middle section
	* New Vanity		* New Vanity
	** 27.5" x 24.25" (w x d)		** 27.5" x 24.25" (w x d)

---

Revision as of 00:05, 20 May 2016

Staging

Bathroom Renovation

Dimensions

Environment:

• Bathroom floor
  • 6' x 5'
• Horizontal Trim
  • 36 & 1/4" from floor

Old Vanity:

• Existing Vanity
  • front: 24" x 30"
• Footwell
  • 4" x 4"

New Vanity:

• New Countertop
  • 28" x 25" (w x d)
  • 5" tall at rear panel
  • 1&1/2" tall at front lip
  • 3/4" thick at middle section
• New Vanity
  • 27.5" x 24.25" (w x d)

Supplies

• [HAVE - Norm] Countertop
• Floor Tiles ($0.69 per ft^2)
• Adhesive ($13.47 per gallon)
• Rubber Trim ($69.97)
  • 4" tall, 120' long
• Glue for Trim ($4.97)
  • Probably need two
• Sealer ($15.87 per gallon)
• High Efficiency Toilet ($100)
• Wall Paint ($???)
• Drywall ($12)

Estimated Total Cost: $243

Stair Treads

Shop has 13 stairs. Need 13 treads.

Stairs are 32" x 9"

A pack of 12 traction tape pieces is on the way.

Tasklist

• UNISTRUT
  • Install Unistrut for Radio Mast Mount \ Camera Mount
  • To be installed either on the corner of the building, or if that is not feasable, behind member storage.
  • Ctag and Omegix to install on 2016.05.21 (Cleanup Day)

• MEGADOOR
  • New exterior usb port on door.
  • usb/nfc auth on back door.
  • Fix front door wiring

• Set up consumables tracking.
  • Item "Stock" for shop?
  • Items that should always be available (soap, duct tape) are voted on by the membership, and then facilities committee works to keep them in stock.

• VENDING
  • LED matrix in soda machine
  • other vending machine Qt interface
  • Other vending machine item supply

• UPGRAYEDS
  • Install water heater timer
  • [doing] Renovate bathroom
    • New linoleum floor
    • CNC new sink cabinet
    • Better fan? Connect fan to outside exhaust?
• Drywall (+ artwork) around upstairs banister
• Replace bikeshed
• Ceiling fan blades in office.
• Traction tape on stairs.
• opening office window.

• FABLAB
  • Finish installing ceiling.
  • Install shelving.
  • [done] fablab AC
    • Thanks Travis!

• [done] Organize lost and found
  • Four shelves. Four weeks.
    • Three weeks to collect item.
    • fourth week anyone can take it.
    • End of the fourth week item is tossed.
  • All incoming/outgoing items are cataloged.

• FIRST AID
  • [doing] Move main first aid kit out of bathroom.
  • Provide floorplan of safety equipment
  • Provide on-demand lectures for first aid.

• Shop tours? Field trips?
  • The shop -- as a nonprofit with the stated goal of spreading the maker spirit -- should be an amazing place for school field trips. Currently I actively avoid them, because there's no way to guarantee that the kids don't encounter a drunk member in the shop. Fixing the problem then censors members in the name of making the shop kid-friendly, which it isn't.
  • I think a solution to this dilemma would be to schedule field trips, and then alert the shop that there will be a dry day when no alcohol consumption or obscenity will be tolerated.

• BIKESHED
  • Bikeshedding
    • Shasta?
  • Bikeshed