Omegix/USB Auth 1.7/Enclosure

From Makers Local 256
< Omegix/USB Auth 1.7
Revision as of 18:09, 1 October 2013 by Omegix (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This page is for the creation of the Project Enclosure for the USB Auth 1.7 project.

  • Materials
    • 1/8 Inch Clear Acrylic.
      • 8 x 4.5 x 2.5 "
  • Project Files
  • Using Inkscape
  • Using Makeshop's laser cutter: Max Cutting Dimensions are 14 x 9 "