Difference between revisions of "Facilities/Equipment And Material Requests"

Revision as of 23:52, 30 October 2013

What It Is

This page is to help people and projects share resources to obtain equipment and material based on a voting and cost metric. If enough people vote for a piece of equipment or material and enough money has been donated towards its purchase, then each month, the Facilities Committee will have the current treasurer pay for the rest of its cost based on available money in the Tool Fund. Alternatively, it can be built by members, salvaged or donated.

How It Works

1. Member puts down something they want with cost and where it can be had.
2. Other members contribute by:
   • Listing their usernames to vote for it.
   • Contribute money towards its purchase (independent from members' monthly pledged donations to the shop). Earmark it and put it in the donation box.
   • Note down alternative ways it can be had or built.
3. If it can only be bought, the metric for purchase is calculated as so:
   X = (Cost - Donations)/Voters
   Cost = cost of equipment or material
   Donations = amount of money received for equipment or material
   Voters = number of people who have voted for equipment or material
4. When X <= $20.00/person, then the equipment or material will be purchased during the next Member's Meeting. Priority will be given to items that reach the X value above first.

Special thanks to Opticron for developing this metric.

Shop Equipment

New Chain for Chainsaw

Chainsaw chain is worn, needs replacement. Blade is 18 inches. Also, chain oil must be purchased with the chain and appropriate fuel-oil mixture to fuel the chainsaw.

• Votes & Donations
  • Ratmandu
• X = $?.??
• Other Resources
  • Pending

Hammer Drill

Will need one to help with putting shelving on walls.

• Votes & Donations
  • Ratmandu
• X = $?.??
• Other Resources
  • Pending

Kitchen Cupboard

Need a kitchen cupboard for when we turn it into a functioning kitchen.

• Votes & Donations
  • AliiCat
  • Cherryblossom
• X = $?.??
• Other Resources

IR Cameras Monitoring Parking Lot

Would like to have two cameras monitoring where we park our cars. IR so it can pick up images at night

• Votes & Donations
  • Omegix
• X = $?.??
• Other Resources

Additional Library Shelving - Will Be Built

Build shelving similar to what Gregabyte built in the library. It will extend the current shelving to the ceiling.

• Votes & Donations
  • Spacefelix
• X = $0.00 - Will be built by members.
• Other Resources
  • Spacefelix will be following Gregabyte's current construction, will be built mainly of extra wood from wood pile and store-bought material.

Garage Workbenches - Under Construction

Heavy tables for tool work in the garage area. Similar to main room tables, but will be equipped with vises, power strips and a hardened top that will allow for markerboarding, but still be able to resist being burned by grinding and welding sparks and flame.

• Votes & Donations
  • Gregabyte
  • Spacefelix
• X = $0.00 - Will be built by members.
• Other Resources
  • Gregabyte built one. Will build more when wood becomes available.

Material Rack - Under Construction

A vertical-horizontal storage rack in the Southeast corner of the storeroom for containing the wood, metal, foam, glass, cardboard and plastic materials we have; long, short and scrap.

• Votes & Donations
  • CrashCart
  • Spacefelix
• X = $0.00 - Will be built by members.
• Other Resources
  • Spacefelix has made blueprints. Easiest resource to build with is 2x4s. Construction will be similar to a wood shelf, but with cubbyholes for bar/rod/beam materials and slots for sheet materials.

Whiteboard Coffee/Dev Table - Will Be Built

There is enough space in the library to put down a coffee table once the cardboard storage is moved downstairs to the material rack. It would just be a coffee table version of the main floor tables with networking and power. Possibly even a magnifying light for small work.

• Votes & Donations
  • CrashCart
  • Omegix
  • Spacefelix
• X = $0.00 - Will be built by members.
• Other Resources
  • Spacefelix has made blueprints.

Software Development Tables - Under Construction

Table for just sitting down with a computer and programming. Would have outlets, lights and other conveniences for computers and other sit-down tasks. Could be placed in library since the shop floor is starting to reach capacity. Current high tables on shop floor great for working, but can get uncomfortable for sit-down tasks. Need a low table with chairs with back support.

• Votes & Donations
  • brimstone
  • omegix
  • CrashCart
• X = $0.00/person - Being built by members.
• Other Resources
  • One already built by brimstone and CrashCart

T962A IR Automatic Reflow Oven

A reflow oven is critical for assembling many surface mount electronic boards, and will make your life much easier when working with tiny electronics components. The T962A IR Reflow Oven is highly recommended by those who do small to medium production PCB runs for projects like those seen on Tindie. The T962A has built-in temperature control with automated ramp-up and ramp-down sequences, eight selectable temperature waveform patterns, the ability to solder dual-sided boards, a 300×320mm soldering area, and can even be used to solder tricky BGA and other under-chip lead packages.

• Cost
  • ~$415 on eBay
• Votes & Donations
  • tylercrumpton ($35 pledged)
• Other Resources
  • Another option is the T962 (no 'A'), which is nearly identical, but with a soldering area of 180×235mm instead. It runs for about $250 on eBay.

Material

• Where can we get 2x4s that are still good enough for shelving and tables?
  • PreauxPhoto said he could get us some.

Can Be Had From Salvage Items & Dumpster Dives

• Common Electronic Components
• Electronics Wire
• Mechanical Components
• Project Cases

Tool Fund

Ask the current treasurer about money and making purchases from the tool fund.

Stuff Being Offered

Offers made to Makers Local 256.